Buchi E-800, Руководство по эксплуатации

Страница: 54 / 88

6 | Operating the interface pro
Büchi Labortechnik AG
54/88 Operation Manual UniversalExtractor E-800
Navigation path
➔
u
Navigate to the [Method] menu via the navigation path.
u
Tap the name of the method that you wish to edit.
ð The display shows the view
Method
.
u
Tap the function [Edit] on the function bar.
u
Tap the action [Inert gas] .
6.6.5 Setting the extraction time of a method
Enter the duration of the extraction time in minutes.
—
at least 0 minutes
— maximum 5940 minutes / 99 hours
Navigation path
➔
u
Navigate to the [Method] menu via the navigation path.
u
Tap the name of the method that you wish to edit.
ð
The display shows the view
Method
.
u
Tap the function [Edit] on the function bar.
u
Tap the action [Extraction time] .
ð The display shows a dialog box with a numeric input box.
u
Enter the value in the numeric input box.
u
Tap the function [OK] on the function bar.
ð The dialog box closes.
u
Tap the function [Save] on the function bar.
ð The value is saved.
6.6.6 Setting the extraction cycles of a method (Soxhlet and Soxhlet Warm
Extraction)
The extraction time and the number of extraction cycles are interdependent.
— If the number of extraction cycles is set to zero, the extraction will finish after the
selected time.
—
If the extraction time is set to zero, the extraction will finish after the number of
extraction cycles is reached.
— If the extraction time and a number of extraction cycles is set, the extraction will
finish once both settings are fulfilled.
The number of extraction cycles is selectable from 0 to 5940.
Navigation path
➔
u
Navigate to the [Method] menu via the navigation path.