Buchi E-800, Руководство по эксплуатации

Страница: 53 / 88

Büchi Labortechnik AG
Operating the interface pro | 6
Operation Manual UniversalExtractor E-800 53/88
u
Navigate to the [Method] menu via the navigation path.
u
Tap the name of the method that you wish to edit.
ð The display shows the view
Method
.
u
Tap the function [Edit] on the function bar.
u
Tap the action [Method name] .
ð
The display shows a dialog with an alphanumeric input box.
u
Enter a name for the method.
u
Tap the function [Save] on the function bar.
ð
The new name is saved.
ð The dialog box closes.
6.6.3 Setting the solvent of a method
NOTE
Solvents from the Solvent menu are selectable.
Navigation path
➔
u
Navigate to the [Method] menu via the navigation path.
u
Tap the name of the method that you wish to edit.
ð The display shows the view
Method
.
u
Tap the function [Edit] on the function bar.
u
Tap the action [Solvent] .
ð
The display shows a dialog with the selectable solvents.
u
Tap the solvent you wish to use.
u
Tap the function [OK] on the function bar.
ð The dialog box closes.
u
Tap the function [Save] on the function bar.
ð The solvent is saved.
6.6.4 Setting the inert gas (option)
NOTE
If the analyte protection sensor triggers inert gas is always released.
Enabling the action [Inert gas ] enables the following actions:
Action Description
[Inert gas Extraction] Activating the checkbox enables the inert
gas during the extraction steps.
[Inert gas Rinse] Activating the checkbox enables the inert
gas during the rinse step.
[Inert gas Drying] Activating the checkbox enables the inert
gas during the drying step.