Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 99 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 99
The following import options are available:

Import into an empty sample memory.

Import into a sample memory that is not empty.
Importing into an empty sample memory
After importing into an empty sample memory, the weighing data and any sample names are now in
the sample memory. The weighing data are input starting from sample No. 1.
Importing into a sample memory that is not empty
Before importing into a sample memory that is not empty, a dialog is displayed in which the user must
choose between two options:

The weighing data can be appended after the current weighed sample. This allows you to import
multiple weighing data records.

The weighing data can be saved in a new document. The weighing data are saved there starting
from sample No. 1. The current open document must be saved and then closed.
Optimizing data evaluation
Optimizing the view
The user can customize the view to his own needs:
Type of view Cross-reference
View of the sample view Cf:
Configuring the sample view
(on page 147)
Specifying the number of decimal places
(on page 147)
Saving the sample view
(on page 148)
Combi view in graph view Cf:
Configuring the graph view
(on page 154)
Setting the size of the graph
(on page 154)
Combi view in calibration view See
Setting the size of the graph
(on page 154).
Combi view in statistics view See
Configure statistics view
(on page 148).
Optimizing report settings
The user can customize report settings to his own needs:
possibilities of customization Cross-reference
Designing an analysis log See
Configure report
(on page 155).
Printer setup See
Printer setup
(on page 101).
Defining printer settings See
Print
(on page 263).
Assessing the print view See
Print preview
(on page 264).