Buchi DuMaster D-480, Руководство по эксплуатации

Страница: 93 / 354

Operating instructions DuMaster D-480 ©BÜCHI Labortechnik AG
5 - Work performed by the system administrator 93
Defining the autoexport directory
Safety instruction
Strictly observe the safety instruction "Improper changes" under
Warning notes during operation
(on page 24).
Selecting a directory
Proceed as follows:

Open the "Device configuration" dialog by selecting
Options > Configuration
.

Select the "DEVICE.INI" tab. Select the "AutoExport" section by clicking the arrow next to the
"Section" dropdown listbox.

Select in the "Items" listbox the entry "directory" and click
Edit
. The "Configure key value" dialog
is displayed:

Enter the desired dirctory in the "Value" field and click
OK
. The "Comment modification" dialog is
displayed.

Enter a justification in the "Comment modification" dialog and click
Close
.

Click
OK
in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.

Click
OK
and quit the operating software.

Restart the operating software as required.
Further information
Further information can be found in:

Database backup.
Database backup
What happens during backup?
Backup copies the complete existing database file to a certain directory under a different name,
thereby "capturing" a certain state.
Backup settings
The following backup settings are available:

Auto-start backup:

daily

every X minutes

every X hours

once at a certain time

Start backup manually
Auto-save
The document currently open is automatically saved to a temporary file every 3 minutes if it is
changed.