background image

2 | Safety

BÜCHI Labortechnik AG

8/34

Operation Manual Ultrasonic Package

Users

Users are persons that meet the following criteria:

—

They have been instructed in the use of the device.

—

They are familiar with the contents of these operating instructions and the applica-
ble safety regulations and apply them.

—

They are able on the basis of their training or professional experience to assess
the risks associated with the use of the device.

Operator

The operator (generally the laboratory manager) is responsible for the following as-
pects:

—

The device must be correctly installed, commissioned, operated and serviced.

—

Only suitably qualified staff may be assigned the task of performing the operations
described in these operating instructions.

—

The staff must comply with the local applicable requirements and regulations for
safe and hazard-conscious working practices.

—

Safety-related incidents that occur while using the device should be reported to the
manufacturer ([email protected]).

BUCHI service technicians

Service technicians authorized by BUCHI have attended special training courses and
are authorized by BÜCHI Labortechnik AG to carry out special servicing and repair
measures.

2.4

Location of warning signs on the product

1

5

Fig. 1: Location of the warning signs

General warning

Electricity

2.5

Residual risks

The device has been developed and manufactured using the latest technological ad-
vances. Nevertheless, risks to persons, property or the environment can arise if the
device is used incorrectly.

Appropriate warnings in this manual serve to alert the user to these residual dangers.

2.5.1

Faults during operation

If a device is damaged, sharp edges, moving parts or exposed electrical wires can
cause injuries.

u

Regularly check device for visible damage.

Содержание 11069891



































Отзывы: