6 Operation
38
Melting Point M-560 Operation Manual, Version G
6.6
User management
An optional user management (11066387) is available to provide regulatory compliance. A serial
number dependent activation code has to be entered in the settings menu. After entering the activa-
tion code, a password to enter the administrator level can be defined.
With the user management a password identification is requested when switching on the instrument.
• If the password is successfully entered, the user gets access to the administrator level.
• Without password identification or the wrong password the user has limited access to the instru-
ment functionalities.
Administrator level
1.
Full access to the instrument functionalities
2.
Access to the Service menu
3.
Possibility to change the password
4.
Connection to MeltingPoint Monitor Software possible
User level
1.
Possibility to choose between melting point and boiling point
2.
Access to the following parameters: start temperature, heating rate and end temperature
3.
Selection of methods, but no editing and deleting
4.
No access to: changing of date and time, calibration data and calibration menu.
5.
No connection to: MeltingPoint Monitor Software
The user management setting for the password protection can be undone by deleting the password in
the administrator mode and leaving the field blank. The user management setting can be reactivated
with the activation key.
The activation key is only valid in the year of purchase.
For later activation please contact: [email protected]
6.7
XML to PC data export
If no printer is connected to the MeltingPoint device, data can be sent to a PC by pushing the
“XML2PC” button. The raw data is transmitted through the serial interface and can be received by the
PC with the following settings:
Table 6-7: PC settings
Baud rate:
19200
Parity:
No
Data bit:
8
Stop bit:
1
No PC software is supplied to receive the XML data.
Picking up the data is the customers responsibility.
OM_093251_M-560_en_G.indd 38
12.07.2018 09:21:23
