1
N
L
5(2) A
HEATING
COOLING
NC
C
NO
NC
C
NO
110 - 240 V 50/60 Hz
2 W max.
X8000W
SX8000W
0 490 37
ST-00000089-
4
5
5
6
7
8
9
10
11
12
2
3
1
13
4
7
A
B
C
126 mm
87 mm
28,1 mm
B
A
C
EN
22/05/2017
Legend
1.
Touch screen display
2.
Temperature/humidity display
3.
“Boost” mode indicator
4.
Wi-Fi connection key
5.
Keys for temperature setting
6.
Boost mode activation
7.
Reset key (keep pressed for 10”, it restores the factory settings)
8.
Manual mode indicator
9.
ON heating indicator
10.
ON cooling indicator
11.
“OFF thermostat” indicator;
7 °C temperature (antifrost) in heating function;
35 °C temperature (heat protection) in cooling function.
12.
Wi-Fi connection indicator
13.
Connection clamps
Front view
Rear view
The Smarther connected electronic thermostat, together with the dedicated Thermostat
App, is a device which allows you to adjust and monitor the temperature in the rooms
locally or remotely. The temperature level can be set locally for manual operation and
the Boost mode can be activated. The Boost forces the switching on of the system for
a limited time (30, 60 or 90 minutes) independent of the measured and programmed
temperature. It can also display the temperature and humidity measured.
Thanks to its Wi-Fi connection, all the programming and most of the functions are
performed simply and intuitively using the App in the home or remotely.
Smarther can be installed on the wall, using screws and dowels suitable for the
installation surface.
Description
Smarther connected thermostat
Power supply
110 – 240 Vac , 50/60Hz
Absorption
2 W max
Maximum cable section 1 x 1.5mm2
Operating temperature 5 – 40 °C
Temperature set-point 5 – 40 °C; increase of 0.5 °C
Type of activation
1BU
Pollution level
2
Rated pulse voltage
4 kV
Wireless device in compliance with 802.11b/g/n standard, frequency 2.4 – 2.4835 GHz,
transmission power < 20 dBm.
WPA/WPA2 safety protocol.
Technical data
Dimensional data
