Page | 4
Wall and Pole Mounting
The BT-470 Item# 841-100041 can be wall mounted by fastening the two angle brackets to the
side of the display, then attaching to a sturdy wall. When installing without the visor, it is
recommended to install in an area protected from direct sunlight and rain.
Item# 841-100040 includes a visor, and pole mounting hardware. The kit included brackets for
a 3” pole, but other sizes can be purchased as needed. Attach the Unistrut to the back of the
visor, then slide clamps into unistrut, tighten the bolt to secure to the pole. Then attach
scoreboard to the visor, selecting one of the three holes to adjust display angle.
