BT Versatility
Owner's Manual
87
To programme PABX Access digits
•
From the Programming Extension, press the PROGRAMME Key
•
Press the Scroll Down Key (
Ô
) until ‘System Programming’ is displayed.
•
Select ‘System programming’.
•
Enter the System Programming Password and select ‘Lines’.
•
Press the Scroll Down Key (
Ô
) until ‘PABX group’ is displayed.
•
Select ‘PABX group’.
•
Select which Outgoing Group you wish to use. You are then presented another menu with
which to programme the parent PABX Access digits.
•
Select ‘Set/clear PABX status’ to set or clear the selected Outgoing Group as a PABX Group.
A confirmation prompt appear momentarily on the top line of the Display
•
Select ‘Access digits’. Enter the ‘Access digits’ for an external Line on the parent PABX and
select ‘Confirm’.
•
Select ‘Ext. num. Length’. Enter the number of digits in the Extension numbers on the
parent PABX.
Press the Hands-free Key to finish programming.
Miscellaneous system configuration options
To change the Programming Extension:
System programming can only be carried out at one Featurephone, that is, the Featurephone
connected to the Programming Extension. By default, Extension 20 is the Programming
Extension. The Programming Extension can be changed to any other Extension if required.
•
From the Programming Extension, press the PROGRAMME Key
•
Press the Scroll Down Key (
Ô
) until ‘System programming’ is displayed.
•
Select ‘System programming’.
•
Enter the System Programming Password and select ‘System’.
•
Select ‘Programming position’.
•
Select the Extension you wish to have as the Programming Extension. The selected
Programming Extension is denoted by a
♦
.
Press the Hands-free Key to finish programming.
