BT Versatility Скачать руководство пользователя

Страница: 109 / 126

BT Versatility
Owner's Manual

109

Outgoing Groups

Outgoing Groups when PRI is programmed

In this case the B channels can not be seperated and therefore the PRI Access is presented as an
individual option and 'Outgoing Groups' are programmed as follows:

•

From the Programming extension, press the PROGRAMME key.

•

Press the Scroll Down key (

) until “System Programming” is displayed.

•

Select “System Programming”.

•

Enter the System Programming Password and select “Lines”.

•

Press the Scroll Down key (

) until “Outgoing Groups” is displayed.

•

Select “Outgoing Groups” option.

•

Select the group you wish to set up. Up to 11 groups can be set up, each with a

corresponding access code, 9 or 760 - 769

•

Select either the 'PRI' or the back up lines (Line 31 - Line 34 or Access 1- 2)

•

If PRI is selected all the available B-channels are placed in the selected group.

In default the PRI Access and additional Lines are all in Group 1, selected by dialling 9.

LCR Codes

Selecting lines when PRI is programmed

When the option to select lines is presented the menu is updated to the 'PRI Access' and the

back up lines equipped. LCR Codes are programmed as follows:

•

From the programming extension, press the PROGRAMME key.

•

Press the Scroll Down key (

) until “System Programming” is displayed.

•

Select “System Programming”.

•

Enter the System Programming Password and select “Lines”.

•

Scroll Down and select “LCR Codes”.

•

Select “LCR On” to activate the feature.

•

Enter in a code index (01-50).

•

Enter an input code (Up to 5 digits). Press “Confirm”. This is the code dialed by the user.

•

Enter an output code (Up to 9 digits). This is the code that will be inserted before the

telephone number that the user dials. This code can be used to select a specific telephone
company.

•

Select the preferred or exclusive option.

•

If “Exclusive” is selected, the calls can only be sent on the lines selected.

•

If “Preferred” is selected, the calls will be routed on the lines selected if they are free. any If

one of these lines are not available the call will be dialed on another free line. In this case, the
output code is not dialed.

Press the handsfree key to finish programming.

Note:

If PRI is selected the LCR programming applies to all B-channels available.

Lines 31-34 or Access 1-2 are the backup lines if equipped.

System Voice Mailbox programming

System Voice Mailbox Programming when a PRI is programmed

System voice mailbox is programmed as follows:

•

From the programming extension, press the PROGRAMME key.

•

Press the Scroll Down key (

) until “System Programming” is displayed.

•

Select “System Programming”.

•

Enter the System Programming Password and select “Lines”.

Содержание Versatility































































































































Результаты поиска

Содержание Versatility

Отзывы:

Похожие инструкции для Versatility

Бренды по названию

Популярные бренды

BT Versatility, Руководство пользователя

Результаты поиска

Содержание Versatility

Отзывы:

Похожие инструкции для Versatility

Бренды по названию

Популярные бренды