BT603 Users Manual
13. Auto Testing
Auto test performs all of the tests chosen from the list (figure 35) including the TDR test (see Section 8.4), qualification tests (10 BASE-T,
100 BASE-TX and 1000 BASE-T) (see Section 9.1), crosstalk test and continuity test (see Section 12.2). In particular, the TDR test
provides the information of cable length and delay skew by pairs.
13.1.
Selecting
Test
Functions
①
②
③
④
Figure 35 Selecting Auto Test Functions
①
Test items. To select them, move the highlight using
; press
when highlighted. The selected items are marked by ‘
⎫
’.
②
When “LAN TDR” is highlighted, you can change VOP by pressing
.
In other cases, you can go back to the previous menu by pressing
.
③
To start the selected tests, press
.
④
When measuring, you can abort the test by pressing
for a while.
43
