BT603 Users Manual
ν
To save the test results, select “SAVE.”
①
②
③
④
⑤
Figure 13 Saving Plots
①
Memory sector where the test is to be saved. If the sector is not empty, it will be highlighted.
To change the memory sector,
press .
②
Fields of test information. To enter string, press
to change the highlighted field; then, press
.
You can use “FILE NAME” as the filename and “LOCATION” as the location where the current test is performed.
③
Fields for location and name entry. moves the cursor and
changes the highlighted character.
④
To exit this menu without saving, press
or
⑤
To store the result, press
. If the memory sector chosen is not empty, the tester asks you if you wish to overwrite. Select the
relevant response using ; press
.
Caution
: If you overwrite the data on the sector, the previous data stored in that sector will be permanently erased.
18
