BT603 Users Manual
6.2.
Setting System Setup
To change system settings, access the Setup menu (Figure
) and edit in 2 as below.
①
②
③
④
Figure 5 System Setting
To edit settings, press to highlight the field, then press
to change the number; press
or
.
Pressing
changes parameter values.
When in edit mode the cursor will blink. Press
to retain to the previous value.
To exit this menu, press
after or before changing values – at this point, the cursor is not blinking.
Pressing or
selects or confirms, or starts the selected function.
ν
To alter the screen contrast, change the number in ‘LCD Contrast’ (min=1 max=11).
ν
To alter the auto-off feature, change the ‘Auto Power’ setting to the number of minutes required before auto-off.
ν
To makes the new settings your default, toggle the ‘Backup mode’ to ON. Leaving ‘Backup Mode’ set to OFF means that the changes
are effective for the current session only.
10
