BSS Audio
FCS-930/960 User Manual v3.0
Page 1
V 3.0
JMK
14
th
October 1998
FCS-930/960
User Manual
This equipment has been tested and found to comply with the following European and
international Standards for Electromagnetic Compatibility and Electrical Safety:
Radiated Emissions (EU):
EN55013
(1990) Associated Equipment
RF Immunity (EU):
EN50082/1
(1992) RF Immunity, Fast Transients
ESD
Mains Disturbance (EU):
EN61000/3/2
(1995)
Electrical Safety (EU):
EN60065
(1993)
Radiated Emissions (USA):
FCC part 15 Class B
Electrical Safety (USA):
UL813/ETL
(1996) Commercial Audio Equipment
Electrical Safety (CAN):
UL813/ETLc
(1996) Commercial Audio Equipment
IMPORTANT SAFETY INFORMATION
DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL. THIS EQUIPMENT MUST BE EARTHED.
IT SHOULD NOT BE NECESSARY TO REMOVE ANY PROTECTIVE EARTH OR SIGNAL
CABLE SHIELD CONNECTIONS TO PREVENT GROUND LOOPS. ANY SUCH
DISCONNECTIONS ARE OUTSIDE THE RECOMMENDED PRACTISE OF BSS AUDIO
AND WILL RENDER ANY EMC OR SAFETY CERTIFICATION VOID.
For continued compliance with international EMC legislation ensure that all input and
output cables are wired with the cable screen connected to Pin 1 of the XLR connectors.
The input XLR Pin 1 is connected to the chassis via a low value capacitor, providing high
immunity from ground loops whilst ensuring good EMC performance.
We have written this manual with the aim of helping installers and sound engineers to get
to grips with the
FCS-930/960
and obtain its maximum capability. If you are new to BSS
products, we recommend that you begin at the start of the manual.
We welcome any comments or questions regarding the
FCS-930/960
or other BSS
products, and you may contact us at the address or World Wide Web site given in
the warranty section.
