background image

DCP-555 Help File 

44 

Master Priority 

This field displays the Master Priority setting of the device providing master clock for the 

BLU link bus. 

Sample Rate 

This field displays the DCP-555's BLU link sample rate setting. 

 

Note:

 The DCP-555 has a fixed sample rate of 48kHz. All devices connected to the 

DCP-555 via BLU link must also be configured with a 48kHz BLU link sample rate. 

Priority 

This field set's the DCP-555's Master Priority setting for the BLU link bus. 
Each BLU link device contains a Master Priority setting, with a possible value between 0 

and 254. Some BLU link devices have a fixed Master Priority setting, while others are 

configurable. 
The device with the highest Master Priority setting on the bus will be configured as the 

BLU link master. If two BLU link devices have the same Master Priority setting, then 

each device's MAC address are compared to determine which will be the master, with 

the device with the higher MAC address winning.  
If connecting to a BLU link bus that requires a certain device to be master, ensure that 

the master device has a higher Master Priority setting than all other BLU link devices on 

the bus. 

Input Port Status 

This field indicates whether or not a valid BLU link connection has been made to the 

BLU link input port. Under normal operating conditions, "Connected" will be displayed. If 

no valid connection is made to the BLU link bus, "Not Connected" will be displayed. If 

"Error" is displayed, this indicates the BLU link input and output cables may be 

swapped, or the BLU link sample rate of the DCP-555 does not match the sample rate 

of other BLU link devices connected to the BLU link bus. 

Input Corrected Count 

This field displays the number of BLU link input data errors corrected. 

Содержание DCP-555




















































































Отзывы: