BSI Co., Ltd.
+886 6 5856617
+886 6 5850103
3F, No.83, Shuren Rd., Shanhua Dist.,
Tainan City 741, Taiwan
truflo.com.tw
TEL
FAX
EMAIL
ADD
WEB
DIMENSIONS
1150mm
1100mm
800mm
360mm
800mm
1070mm
1070mm
360mm
880mm
880mm
SCHEMATIC
ASSEMBLY INSTRUCTIONS
Put the rubber base and stainless steel
cover together. Take a flat washer, install-
ing it to the 3/8-16*3 hex head cap screw,
tilting the base to insert the screw to the
bottom of the base. Insert the pole (the
depth side) to the top of the base, then
turn it to attach the base.
Position the stand to the floor, putting the
L Support Plate to the top of the stand,
screwing the 3/8-16*5/8 hex head cap
screw with a flat washer to the corre-
sponding hole. Stand on the base and
turn the top to tighten the stand.
Open the dispenser. Align the two screws
on the L Support Plate to the holes on the
backplate, screwing the M4*7*5mm hex
nylon insert nuts to the screws. Finally,
install the bottle filled with chemicals and
batteries, locking the machine to finish
the installation.
HARDWARE BAG INCLUDES
3/8-16*3
HEX HEAD
CAP SCREW
3/8-16*5/8
HEX HEAD
CAP SCREW
10MM(ID)
20MM(OD)
FLAT WASHER
4*12MM
MACHINE
SCREWS
M4*7*5MM
HEX NYLON
INSERT NUTS
ASSEMBLY
TOOLS
1
2
3
1
2
3
1
2
3
