BDP WiFi
Adapter
Owner’s Manual
Thank you for purchasing a Bryston BDP Wifi Adapter.
This adapter is compatible with all hardware versions
of the BDP when they are running firmware version
S2.36 or greater.
The adapter is compatible with most wifi networks
based on the 802.11n standard. Naturally, performance
and speed are largely dependent on distance from
the wifi access point and interference from physical
obstructions and competing wifi traffic from other
nearby devices and networks. The theoretical
maximum throughput is 300mbps which is far beyond
what is needed to stream high resolution audio from
an NAS or TIDAL.
The adapter kit includes a short USB extension cable
which allows some flexibility in placing the wifi
adapter in order to obtain the best wifi reception. If
you experience audio dropouts or difficulty controlling
the BDP from your network connected device,
experiment with using the extension cable and placing
the adapter away from your audio equipment to try
and get better signal.
To install the wifi adapter, simply remove the white
protective cap, and insert the adapter into any free
USB port on your BDP. Disconnect any other network
cable. Reboot the BDP and follow the instructions on
the reverse side of this page.
Questions or requests for help can be directed to our
service department at
http://bryston.com/pages/contact.html
or by phone +1-705-742-5325
