Brymen TBM157 страница 24 Скачать руководство пользователя | Manualshive

Страница: 24 / 24

background image

LIMITED WARRANTY

BRYMEN warrants to the original product purchaser that each product it manufactures
will be free from defects in material and workmanship under normal use and service
within a period of one year from the date of purchase. BRYMEN's warranty does not
apply to accessories, fuses, fusible resistors, spark gaps, batteries or any product
which, in BRYMEN's opinion, has been misused, altered, neglected, or damaged by
accident or abnormal conditions of operation or handling.

To obtain warranty service, contact your nearest BRYMEN authorized agent or send
the product, with proof of purchase and description of the difficulty, postage and
insurance prepaid, to BRYMEN TECHNOLOGY CORPORATION. BRYMEN assumes
no risk for damage in transit.

BRYMEN will, at its option, repair or replace the

defective product free of charge.

However, if BRYMEN determines that the failure

was caused by misused, altered, neglected, or damaged by accident or abnormal
conditions of operation or handling, you will be billed for the repair.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR USE.

BRYMEN WILL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES.

BRYMEN TECHNOLOGY CORPORATION

TEL:+886 2 2226 3396
FAX:+886 2 2225 0025

http://www.brymen.com

PRINTED ON RECYCLABLE PAPER, PLEASE RECYCLE

COPYRIGHT © MMXIII Btc,

ALL RIGHTS RESERVED

P/N: 7M1C-1051-000X

PRINTED IN TAIWAN

«
...
22
23
24

Содержание TBM157

























Отзывы:

Нет отзывов

Похожие инструкции для TBM157

Бренд: Contrel Страницы: 16

Бренд: Bticino Страницы: 20

Бренд: National Instruments Страницы: 37

Бренд: BGS technic Страницы: 21

Бренд: Geokon Страницы: 26

Бренд: PeakTech Страницы: 40

Бренд: PeakTech Страницы: 60

Бренд: PeakTech Страницы: 64

Бренд: PeakTech Страницы: 40

Бренд: strex Страницы: 40

Бренд: Steinberg Systems Страницы: 23

Бренд: Amprobe Страницы: 146

Бренд: Amprobe Страницы: 152

16-CH Color Full Duplex Multiplexer NMC-1600

Бренд: Mace Страницы: 31

Бренд: Keithley Страницы: 25

Бренд: Kaise Страницы: 2

Бренд: Kaise Страницы: 2

Бренд: Kaise Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды