Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
6
mode input impedance increases abruptly from initial 2.1
on high voltage hard signals
sers of being in such
low impedance mode. Peak initial load current, while probing 1000VAC for example, can be
up to673mA (1000V x 1.414 / 2.1
, decreasing abruptly to approx.2.4mA (1000V x 1.414
/ 580
Do not use
mode on circuits that could be
damaged by such low input impedance. Instead, use rotary selector
or
high input
impedance voltage modes to minimize loading for such circuits.
Press the
button momentarily to select the subject functions in sequence. Last
selection will be saved as power up default for repeat measurement convenience.
Note:
and the associated
are equipped with digital low pass filter (DSP), and are
capable of handling
(Variable Frequency Drives) signals for fundamental V & Hz
readings. It also improves ACV and Hz reading stability when being used in most noisy
electrical environments.
