Bruker SmartCooler BCU I, Руководство пользователя

Страница: 7 / 50

Safety
Z33119_2_003 7
2 Safety
2.1 Intended Use
The device has been designed and constructed solely for the intended use described here.
The SmartCooler
TM
BCU I is the successor model of the BCU05. The lowest temperature of
the cooled VT gas is with a BCU I below -40°C up to 50 Nl/min. The SmartCooler
TM
BCU I
produces the cooling energy via one compressor refrigerator with electrical power. This
SmartCooler
TM
is recommended for NMR experiments with a sample temperature T
S
between
0°C and T
RT
.
Intended use also includes compliance with all specifications within this manual. Any use
which exceeds or differs from the intended use shall be considered improper use. No claims
of any kind for damage will be entertained if such claims result from improper use.
2.2 System Owner's Responsibility
System Owner
The term system owner refers to the person who operates the device for trade or commercial
purposes, or who surrenders the device to a third party for use/application, and who bears
the legal product liability for protecting the user, the personnel or third parties during the
operation.
System Owner‘s Obligations
The device is used in the industrial sector, universities and research laboratories. The system
owner of the device must therefore comply with statutory occupational safety requirements.
In addition to the safety instructions in this manual, the safety, accident prevention and
environmental protection regulations governing the operating area of the device must be
observed.
In this regard, the following requirements should be particularly observed:
• The system owner must obtain information about the applicable occupational safety
regulations, and - in the context of a risk assessment - must determine any additional
dangers resulting from the specific working conditions at the usage location of the device.
The system owner must then implement this information in a set of operating instructions
governing operation of the device.
• During the complete operating time of the device, the system owner must assess whether
the operating instructions issued comply with the current status of regulations, and must
update the operating instructions if necessary.
• The system owner must clearly lay down and specify responsibilities with respect to
installation, operation, troubleshooting, maintenance and cleaning.
• The system owner must ensure that all personnel dealing with the device have read and
understood this manual. In addition, the system owner must provide personnel with
training and hazards information at regular intervals.
• The system owner must provide the personnel with the necessary protective equipment.