manualshive.com logo in svg

Bruker SamplePro hr-MAS, Руководство пользователя, Страница: 35 / 82

Поделиться
Скачать
Bruker SamplePro hr-MAS Скачать руководство пользователя страница 35

35

Z31914_00_01

Transport, Packaging and Storage

Component Sensitive to Electrostatic Charge

Protect from Heat

Protect from Heat and Radioactive Sources

6.2

Inspection at Delivery

Upon receipt, immediately inspect the delivery for completeness and transport damage. 

Proceed as follows in the event of externally apparent transport damage:

•

Do not accept the delivery, or only accept it subject to reservation.

•

Note the extent of the damage on the transport documentation or the shipper's 
delivery note.

•

Initiate complaint procedures.

i

Issue a complaint in respect to each defect immediately following detection. Damage 
compensation claims can only be asserted within the applicable complaint deadlines.

The packaging contains components which are sensitive to an 
electrostatic charge.

Only allow packaging to be opened by trained personnel. 

Establish potential equalisation before opening. 

Protect packages against heat and direct sunlight. 

Protect packages against heat, direct sunlight and radioactive 
sources. 

Содержание SamplePro hr-MAS



















































































Отзывы:

Нет отзывов