manualshive.com logo in svg

Bruker minispec mq20, Руководство пользователя, Страница: 66 / 86

Поделиться
Скачать
Bruker minispec mq20 Скачать руководство пользователя страница 66

minispec.exe Software for Diagnostic and Service Purposes

66

E1400912_1_001

– Transmitter power status.

– Heater power status.

– Electronic  Control  Unit  temperature  status  (grayed  if  Control  Unit  temperature

detection is set OFF.

– External Gradient Unit status.

– Possibility of attenuated and shaped pulses.

The entries are marked with a checkmark (

) when the corresponding item status is OK.

Shortcut: 

Info Tool Bar:

3.

Results Mean

. This function displays the Statistics Box (see figure), a window which

allows general monitoring of measurement results. The Statistics Box contains:

– Mean value.

– Standard deviation.

– Current data value.

– Total number of data.

– Maximum value.

– Minimum value.

– Difference between minimum and maximum value.

– Graphic representation (Statistics “Meter”).

The window can be minimized with the double arrow in the upper right part of the box (see
figure). Only the graphic view will be displayed in the minimized form. The green area in
the graph displays the range of tolerance for the measurement, the vertical lines through
the meter indicate the actual values, and the continuous broad vertical line represents the
mean value.

Figure 8.13: The Statistics Box

Содержание minispec mq20























































































Отзывы:

Нет отзывов