Bruker minispec mq20 Скачать руководство пользователя страница 48

Страница: 48 / 86

minispec.exe Software for Diagnostic and Service Purposes

E1400912_1_001

Figure 8.1: The Welcome Box

Several symbols, entries and buttons are displayed in the

Welcome Box:

• Applications to be loaded (path and file name in the white field).

• Serial number of the minispec to be connected to (here: NE3449).

• Type of analyzer (here:

NMR Analyser

• The calibration permission is symbolized using a flag.

The wake-up application can also be selected for future program start-up. When the user has
finished with the selections, the

button is used to start the software.

To change the configuration, press the

Setup

button. The configuration is protected by a

simple log-in mechanism.

• First log-in: Press the

Setup

button. Enter and confirm a password. The password will be

saved automatically and

you will need it for every subsequent log-in. Handle the

password carefully!

Only users who have permission to make changes to calibrations

and software configurations should have knowledge of the password. If password
protection is not desired, simply click

or <

Enter

> without entering a password when

the password entry box appears and confirm this in the following box.

• Later log-in: Press the

Setup

button and enter the password or click twice on

password protection is not used.

8.1.2.1

Selecting Applications and Connections

If you click

Setup

in the Welcome Box you will open the

configuration level

of the welcome

dialog. This password procedure is described in the section above. Up to 20 applications can
be selected to be loaded at the startup. To add applications to the list use

Browse...

access a file selector box or use

Delete

to remove applications from the list.

To choose another minispec, use the

Select

button in the

Select minispec to connect to

field.

Содержание minispec mq20























































































Результаты поиска

Содержание minispec mq20

Отзывы:

Bruker minispec mq20, Руководство пользователя, Страница: 48 / 86

Результаты поиска

Содержание minispec mq20

Отзывы: