Bruker minispec mq20 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 86

Bruker minispec mq20 Скачать руководство пользователя страница 17

Transport, Packaging and Storage

E1400912_1_001

17

3.3

Packaging

About Packaging

The individual packages are packaged in accordance with anticipated transport conditions.
Only environmentally friendly materials have been used in the packaging.

The packaging is intended to protect the individual components from transport damage,
corrosion and other damage prior to assembly. Therefore do not destroy the packaging and
only remove it shortly before assembly.

It is recommended to store the packaging for later use in the event that you need to return the
unit to Bruker.

Handling Packaging Materials

Dispose of packaging material in accordance with the relevant applicable legal requirements
and local regulations (see

Dismantling and Disposal [

).

3.4

Storage

Storage of the Packages

Store the packages under the following conditions:

• Do not store outdoors.

• Store in dry and dust-free conditions.

• Do not expose to aggressive media.

• Protect against direct sunlight.

• Avoid mechanical shocks.

• Storage temperature: 15 to 35 °C.

• Relative humidity: max. 60%.

• If stored for longer than 3 months, regularly check the general condition of all parts and

the packaging. If necessary, top-up or replace preservatives.

Note:

Under certain circumstances, storage instructions may be affixed to packages which

expand the requirements specified here. Comply with these accordingly.

«
...
15
16
17
18
19
...
»

Содержание minispec mq20























































































Отзывы:

Нет отзывов