Bruker BMPC/2, Техническое руководство

Страница: 111 / 136

111 Z31823_00_05
Configuration (administrator)
12.3.4 Alarm & Phone System
For complete information on using the alarm and telephone system, also read "Alarm
System" on page 39 .
12.3.4.1 Phone Line & Modem Settings
In this settings window the most important adjustments for the telephone supported
alarm system are configured.
Figure 12.24Tools - Options - Phone Line & Modem Settings
In order to use a modem with the system the modem information must be entered in the
Modem settings area. Normally the system is pre-configured and this step is not neces-
sary, but if this step is required, press
Change
to select the modem device from a list of
devices.
Enter the telephone number of the phone to which the system is connected. This num-
ber is used for the „Phone Line Test“. When the system is set to „Monitoring & Alarm
Mode“ and the „Phone Line Test“ is enabled, the system tries to call itself to test the
phone line.
i
Notice: On some phone systems it is possible that this test does not work properly. In
this case disable the „Phone Line Test“.
The system has an integrated „Voice Box System“ which is used for an alarm sequence,
or for requesting a remote status report (see "Voice Box System" on page 43 ).