Bruker BioSpec 70/30 USR V2, Руководство пользователя

Страница: 7 / 104

Introduction
Site Planning Information BioSpec 70/30 USR_2_V020 7
1 Introduction
This manual provides support for the system owner when planning installation and meeting
the installation requirements of an MR system by specifying planning data.
1.1 About this Manual
This manual is to be used by the System Owner (responsible body) and planning offices that
have been entrusted with the site planning of the installation of the MR instrument. It provides
the installation requirements of the MR instrument.
This manual does not intend to provide instructions for installation. A MR instrument is only to
be installed by Bruker Service or by personnel authorized by Bruker.
1.2 Overview
Chapter Safety [
}
9] provides safety instructions for the System Owner (responsible body)
for the installation procedure. There are also references to safety instructions that are not
relevant for carrying out installation itself, but which should be heeded during subsequent
operation and may have repercussions on installation planning. Regulatory standards of the
MR instrument are provided in the
Chapter Standards [
}
21] .
Chapter Installation Schedule [
}
23] provides instructions on the operational sequence of
the planning and installation and describes the necessary prerequisites and responsibilities of
the System Owner, which must be met, before installation by Bruker Service may start.
Chapter Laboratory infrastructure and interactions [
}
27] describes the general and
infrastructure specifications for the installation site within a laboratory. Aspects relating to a
subsequent smooth operating procedure and to interactions with other laboratory facilities
and the building are discussed here.
Chapter Planning Details [ } 37] provides specific and detailed specifications for the various
installation areas of the MR instrument, e.g. required space, cooling water, and electrical
connection data.
Chapter Seismic safety specifications [
}
57] therein provides instructions associated with
installation under specific environmental conditions such as e.g. seismic regions.
Chapter Delivery and Transport [
}
79] lists the prerequisites and conditions for the delivery
and transport of the MR instrument.
Chapter Checklist in Preparation of the Installation [
}
89] provides a check list that must be
used for installation planning.
1.3 Additional Documents
The existing manual supplements the documentation of the BioSpec® MR instrument for the
sole purpose of planning the installation.
The installation of a MRI CryoProbe™ or Inline PET requires additional installation planning
and additional installation requirements. Please contact your local Bruker office.