VIBROTEST 60
Acquiring and displaying measurements
___________________________________________________________________
_________________________________________________________________________________
© VTEST60E July 2013 V4.46ff
C102 853.002
Page 87 of 168
5.6.1 Free-running measurement
Measurement window
Meas. value 1st order
Amplitude/Phase
Meas. value nth order
Amplitude/Phase
Speed / Unit
Unit
Signal detection
Unit
Signal detection
Speed / Reference
START The measurement process is started. „STOP„ is dis-
played and the channel number flashes to indicate
that the measurement is in progress.
STOP
The measurement is ended. „START„ is displayed to
indicate that the measurement process has stopped
Deletes the
entire
Listing memory without a confir-
mation request.
DEL 3
Deletes
one data set
from the Listing memory (in the
above example data set no. 3).
AVERAGE Switches the averaging function On/Off.
Displayed measurements can be temporarily stored in the
Listing memory. The capacity of the Listing memory is 100
entries.
The capacity of the Listing memory is 100 entries. For details of
the Listing function see chapter 5.1.1
Note:
If there are measured values in the Listing memory, the
memory must first be deleted using
before Measurement
vs. Speed can be activated.
Содержание VIBROTEST 60
Страница 1: ...Technische Dokumentation Technical Documentation Dokumentation Technique VIBROTEST 60 C006389 01...
Страница 4: ...Technische Dokumentation Technical Documentation Dokumentation Technique VIBROTEST 60 C006389 01...
Страница 172: ...Anhang EG Konformit ts Erkl rungen VIBROTEST 60 Page 168 of 168 C102 853 002 VTEST60E July 2013 4 46ff...
