Brüel & Kjær Vibro VIBROTEST 60 Скачать руководство пользователя страница 135

Страница: 135 / 172

VIBROTEST 60 Storing and displaying measurements (Reports) on the PC-card

_________________________________________________________________________________

C102 853.002

Page 131 of 168

Storing and displaying measurements (Reports)

on the PC-card

8.1

Storing Reports on the PC-card

Menu title

Storage date and time

Report name:

The current measured data is stored under the dis-

played Report name and the previous menu is dis-

played. If a new name is to be given to the Report it

is entered after pushing EDIT.

DELETE The displayed name is deleted for entry of a new

name.

EDIT

Enter a Report name.

Using the button »STORE« the contents of the display memory

resp. Listing memory are stored on the PC-card. The Setup for

the respective measurement is stored together with the

measured data.
A name for the Report can be freely entered (max. 12

characters). In addition the current date and time are also

stored.

Note:

Storage on the PC-card is only possible when the current

measurement is stopped or ended, ie when the softkey

»START« is displayed.

Содержание VIBROTEST 60













































































































































































Результаты поиска

Содержание VIBROTEST 60

Отзывы:

Brüel & Kjær Vibro VIBROTEST 60, Техническая документация инструкция, Страница: 135 / 172

Результаты поиска

Содержание VIBROTEST 60

Отзывы: