LDSBus Isolated IO Controller Datasheet
Version 1.1
Document Reference No.: BRTSYS_000009 Clearance No.: BRTSYS#005
Copyright © BRT Systems Pte Ltd
1
1
Introduction
1.1
Features
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted, or
Reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its
documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or
implied. BRT Systems Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product.
Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device, or
System in which the failure of the product might reasonably be expected to result in personal injury. This document provides
preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights
is implied by the publication of this document. BRT Systems Pte Ltd, 178 Paya Lebar Road, #07-03, Singapore 409030. Singapore
Registered Company Number: 202220043R.
LDSBus Isolated IO Controller
Datasheet
The LDSBus Isolated IO Controller offers 2
isolated channels of digital and analog inputs and
a variety of associated power source options to
achieve 3.3V, 5V, 10V, 12V referenced signals
besides sourcing power from external voltage
sources. Each channel (input and output) is
isolated from the others.
Each digital output can switch between 0V and
3.3V, 5V, 12V or referenced to an external
voltage source. Each digital input can be between
0V and 1.8V to 12V. A 5V voltage source is
provided for common applications that switch
between 0-5V.
Each analog output can produce a voltage
between 0-10V, and each analog input supports
voltage or current controlled input sources
ranging between 0-10V.
The controller may be used in numerous and
diverse applications such as simple IO control, or
0-10V dimmers, weather station, water level
detector or sensor, etc.
•
2 isolated digital output channels
•
2 isolated digital input channels
•
2 isolated analog output channels
•
2 isolated analog input channels
•
Built-in power supply (3.3V/ 5V/ 10V/ 12V)
and external power supply option
•
Flexible combination of internal or external
power supply
•
Supports BRTSYS LDSBus protocol
•
Low power consumption
•
Operating temperature range : 0
o
C to +55
o
C
•
Flush mount and DIN Rail mounting options
•
Supported platforms: LDSBus Host, BRTSYS
IoTPortal, and PanL Smart Living products.
Visit
for
more information
