BRP SPARK SERIES, Руководство оператора

Страница: 64 / 148

OPERATING INSTRUCTIONS
How to Engage Neutral
(Models with iBR)
WARNING
The drive shaft and impeller are
always turning when the engine is
running, even in neutral position.
Keep away from the propulsion
system of the watercraft.
When the watercraft is first started,
the iBR system automatically sets the
neutral position by default.
To engage neutral from forward posi-
tion, tap the iBR lever.
To engage neutral from reverse posi-
tion, release the iBR lever and throttle
lever.
How to Engage Forward
(Models with iBR)
To engage forward from neutral po-
sition, tap on the throttle lever. The
watercraft will accelerate forward.
To engage forward from reverse posi-
tion, release the iBR lever, then tap the
throttle lever.
To re-engage forward from braking, si-
multaneously pull in the throttle lever
while releasing the iBR lever. The wa-
tercraft will accelerate forward after a
short delay.
smo2014-005-063_a
TYPICAL - ENGAGING NEUTRAL
1. Throttle lever
How to Engage and Use
Reverse (Models with iBR)
Reverse can only be engaged between
idle speed and the threshold forward
speed of 7 km/h (4 MPH).
To engage reverse position, the iBR
lever on the LH handlebar must be
pulled in at least 25% of the lever
travel.
smo2014-005-053 _a
TYPICAL - iBR LEVER
1. iBR lever
2. Lever released position
3. Approximate 25% position
4. Operating range
When operating the iBR lever in re-
verse mode, the throttle lever can
be used to control engine RPM, and
thus the amount of reverse thrust pro-
duced.
By modulating throttle lever, reverse
thrust can be more precisely con-
trolled. Too much RPM will create
water turbulence and reduce reverse
efficiency.
NOTE: Engine power will be limited
whenever the iBR lever position is
changed.
Release the iBR lever to end reverse
operation.
To stop rearward motion after iBR lever
release, apply enough throttle to stop
rearward movement.
WARNING
The brake function has no effect
when travelling in reverse.
62
______________