BRP SPARK SERIES Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 148

BRP SPARK SERIES Скачать руководство пользователя страница 50

MULTIFUNCTION GAUGE (LCD)

The iBR fault indicator comes ON
when a fault in the iBR system has
been detected.

Refer to

TROUBLESHOOTING

sub-

section for details.

11) GPS Active Indicator (Models
with iBR)

A GPS incorporated in the multifunc-
tion gauge provides the speed in the
multifunction display.

This is confirmed when the GPS active
indicator is visible in the digital screen.

Navigating the
Multifunction Display

WARNING

Do not adjust display while riding,
you could lose control.

Selecting Functions

When the electrical system is pow-
ered up and the cluster has completed
its self test function, a WELCOME
ABOARD SEA-DOO scrolling mes-
sage will appear for a few seconds.
After the welcome message, the mul-
tifunction display will display the last
selected option.

NOTE:

You can skip the welcome

message by pressing the MODE but-
ton.

The multifunction display is also used
to display a menu for the selection of
various functions which permit chang-
ing the numerical display indication,
system modes of operation (Rotax
ACE 900 HO), and active system fault
messages.

NOTE:

To change the unit of measure-

ment or the language displayed, see
your authorized Sea-Doo dealer.

1. To select the various options avail-

able through the multifunction dis-
play, press quickly the MODE but-
ton repeatedly until the desired dis-
play options is visible:

– SPEED
– RPM
– HOUR

Display Option Description

Speed

The SPEED can be displayed in km/h
or MPH depending on the unit of mea-
surement setting.

Models with iBR

The speed indication is based on a GPS
(Global Positioning System) incorpo-
rated within the multifunction gauge.

If for some reason the GPS signal is
lost, a default mode is used whereby,
the speed is calculated using infor-
mation received from other systems
to provide an estimated watercraft
speed.

RPM

The RPM is displayed as a numerical
value.

Hour

The HOUR is used to display the accu-
mulated engine hours.

48

______________

«
...
48
49
50
51
52
...
»

Содержание SPARK SERIES





















































































































































Отзывы:

Нет отзывов