BRP SPARK SERIES, Руководство оператора

Страница: 108 / 148

TROUBLESHOOTING GUIDELINES
ENGINE WILL NOT START
1. Burnt fuse: main, electric starter or ECM.
– Check wiring then replace fuse(s).
2. Discharged battery.
– Charge battery. Refer to CHARGING A BATTERY in BATTERY.
WARNING
Do not charge or boost the battery while installed on the watercraft. Elec-
trolyte is poisonous and dangerous. Avoid contact with eyes, skin and
clothing.
3. Battery connections, corroded or loose. Bad ground.
– Refer to an authorized Sea-Doo dealer.
4. Water-flooded engine.
– Refer to WATER-FLOODED ENGINE in SPECIAL PROCEDURES.
5. Faulty sensor or ECM.
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
6. Seized jet pump.
– Try to clean. Otherwise, refer to an authorized Sea-Doo dealer.
ENGINE CRANKS SLOWLY
1. Loose battery cable connections.
– Check/clean/tighten.
2. Discharged or weak battery.
– Charge battery. Refer to CHARGING A BATTERY in BATTERY.
3. Worn starter.
– Refer to an authorized Sea-Doo dealer.
ENGINE TURNS NORMALLY BUT WILL NOT START
1. Fuel tank empty or water-contaminated.
– Refill. Siphon and fill with fresh fuel.
2. Fouled/defective spark plugs.
– Replace.
3. Blown fuse.
– Check wiring then replace fuse(s).
4. Water-flooded engine.
– Refer to WATER-FLOODED ENGINE in SPECIAL PROCEDURES.
106
______________