BRP Rotax 4-TEC 150 страница 46 Скачать руководство пользователя

Страница: 46 / 64

Technical Information and Specifications

TECHNICAL INFORMATION

ENGINE IDENTIFICATION
NUMBER

The Engine Identification Number (EIN) is lo-

cated on the upper crankcase on MAGNETO

side of each engine.

ENGINE EMISSIONS INFORMA-
TION

Manufacturer’s Responsibility

Manufacturers of marine inboards must deter-

mine the exhaust emission levels for each in-

board horsepower family and certify these in-

boards with the United States of America En-

vironmental Protection Agency (EPA). An

emissions control information label, showing

emission levels and inboard specifications,

must be placed on each inboard at the time of

manufacture.

Dealer’s Responsibility

When performing service on BRP engine

types that carry an emissions control informa-

tion label, adjustments must be kept within

published factory specifications.
Replacement or repair of any emission relat-

ed component must be executed in a manner

that maintains emission levels within the pre-

scribed certification standards.
Dealers are not to modify the engine in any

manner that would alter the horsepower or al-

low emission levels to exceed their predeter-

mined factory specifications.
Exceptions include manufacturer’s prescribed

changes, such as altitude adjustments, for ex-

ample.

Owner’s Responsibility

The owner/operator is required to have in-

board maintenance performed to maintain

emission levels within prescribed certification

standards. The owner/operator is not to, and

should not allow anyone to, modify the in-

board in any manner that would alter the

horsepower or allow emissions levels to ex-

ceed their predetermined factory specifica-

tions. Tampering with the fuel system to

change horsepower or modify emission levels

beyond factory settings or specifications will

void the product warranty.

EPA Emission Regulations

All inboard engines by BRP are certified to the

EPA as conforming to the requirements of the

regulations for the control of air pollution from

new watercraft marine spark ignition in-

boards. This certification is contingent on cer-

tain adjustments being set to factory

standards. For this reason, the factory proce-

dure for servicing the product must be strictly

followed and, whenever practical, returned to

the original intent of the design. The responsi-

bilities listed above are general and in no way

a complete listing of the rules and regulations

pertaining to the EPA requirements on ex-

haust emissions for marine products. For

more detailed information on this subject, you

may contact the following locations:

TYPICAL

1. Engine Identification Number (EIN)

B00008

Содержание Rotax 4-TEC 150

































































Результаты поиска

Содержание Rotax 4-TEC 150

Отзывы:

Похожие инструкции для Rotax 4-TEC 150

Бренды по названию

Популярные бренды

BRP Rotax 4-TEC 150, Руководство оператора

Результаты поиска

Содержание Rotax 4-TEC 150

Отзывы:

Похожие инструкции для Rotax 4-TEC 150

Бренды по названию

Популярные бренды