BRP Lynx Rave 600RS 2020 Скачать руководство пользователя страница 163 | Manualshive

Страница: 163 / 188

BRP Lynx Rave 600RS 2020 Скачать руководство пользователя страница 163

BRP FINLAND OY LIMITED WARRANTY
FOR THE EUROPEAN AND THE
COMMONWEALTH OF THE INDEPENDENT
STATES (CIS) AREAS AND TURKEY : 2020
LYNX

®

SNOWMOBILES

1) SCOPE OF THE LIMITED

WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2020
LYNX snowmobiles sold by distributors or dealers authorized by
BRP to distribute LYNX snowmobiles ("LYNX Distributor/Dealer") in
member states of the European Economic Area (which is comprised
of the member states of the European Union plus Norway, Iceland
and Liechtenstein) ("EEA"), in member states of the Commonwealth
of the Independent States (including Ukraine and Turkmenistan)
(''CIS'') and Turkey from defects in material or workmanship for the
period and under the conditions described below.

Non-factory installed parts and accessories are not covered under
this limited warranty. Please refer to the applicable parts and acces-
sories limited warranty text.

This limited warranty will become null and void if: (1) the snowmo-
bile was used for racing or any other competitive activity, at any point,
even by a previous owner; or (2) the snowmobile has been altered or
modified in such a way so as to adversely affect its operation, perfor-
mance or durability, or has been altered or modified to change its in-
tended use.

2) LIMITATIONS OF LIABILITY

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS
EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EX-
TENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED
WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTIES. INCIDENTAL AND CONSEQUENTIAL
DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY. SOME JURISDICTIONS DO NOT ALLOW FOR THE
DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED
ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY
ALSO HAVE OTHER LEGAL RIGHTS WHICH MAY VARY FROM
COUNTRY TO COUNTRY.

_________________

161

«
...
161
162
163
164
165
...
»

Содержание Lynx Rave 600RS 2020





























































































































































































Отзывы:

Нет отзывов