PARTS TO BE INSTALLED
rbl2009-001-003_a
TYPICAL - HORN RETAINING BOLT LOCATION
Latch Release Cable, Front
Storage Compartment Cover
1. Feed the latch release cable through the latch
base eyelet.
2. Attach latch release cable end to latch lever
tongs.
3. Using pliers, squeeze lever tongs together to
prevent cable from coming out of latch release
lever.
rbl2013-002-004
4. Verify if the front storage compartment cover
opens and closes correctly.
5. Adjust cable if necessary.
NOTICE
If the key does not turn easily, do not
force it. Pull it out and reinsert.
Diagnostic Link Cable (DLC)
1. Insert diagnostic link cable (DLC) in its holder in
the front section of vehicle for storage.
rbl2013-002-005
DLC CABLE STORAGE
Body Parts Installation
NOTICE
Do not overtighten screws. Any de-
formation in the body panel around the screw
is an indication that it is too tight. Be careful
not to damage the panels.
Front Panels
1. Install M6 panel nuts on front panels (included
in the PDI kit)
Brazil models
rbl2009-001-004_a
RH FRONT PANEL SHOWN, LH SIMILAR
1. Front M6 panel nuts
16 / 39
2014-2
PREDELIVERY
