BRP can-am RENEGADE 1000 2015 Скачать руководство пользователя страница 88

Страница: 88 / 156

TUNE YOUR RIDE

Rebound Damping

vmo2012-014-056_a

1. Rebound adjuster (screwdriver required)

Turn adjuster clockwise (H) to

increase

shock damping action (stiffer).

Turn adjuster counterclockwise (S)
to

decrease

shock damping action

(softer).

Steering Assist
Adjustment (DPS) (X xc
Models)

The following DPS modes are preset in
the vehicle.

DPS MODE

DPS

MAX.

Maximum steering assist

DPS

MED.

Medium steering assist

DPS

MIN.

Minimum steering assist

To show the active DPS mode, pro-
ceed as follows:

1. Press and release

DPS

button.

vmo2012-014-021_d

TYPICAL

1. DPS button

2. Check the multifunction gauge to

confirm the current DPS mode.

vmo2010-006-002_a

1. DPS mode display

To change the DPS mode, proceed as
follows:

1. Press and hold

DPS

button for 2 sec-

onds to go to the next setting.

2. Release

DPS

button.

3. Repeat until desired setting is se-

lected.

NOTE:

The DPS assist adjustment is

not available in reverse.

While reading this Operator’s Guide, remember that:

WARNING

Indicates a potential hazard that, if not avoided, could result in serious
injury or death.

______________

Содержание can-am RENEGADE 1000 2015





























































































































































Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы:

BRP can-am RENEGADE 1000 2015, Руководство оператора, Страница: 88 / 156

Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы: