BRP can-am RENEGADE 1000 2015 Скачать руководство пользователя страница 102

Страница: 102 / 156

MAINTENANCE PROCEDURES

Remove as much deposits as you can
with your hands. If water is available in
proximity, try rinsing the radiating fins.

If available, use a garden hose to rinse
the radiating fins.

CAUTION

Never clean radiator

with your hands when it is hot. Let
the radiator cool down before clean-
ing.

NOTICE

Be careful not to damage

the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. The fins are pur-
posely thin parts to allow efficient
cooling. WHEN RINSING, USE LOW
PRESSURE ONLY, NEVER USE A
HIGH PRESSURE WASHER.

See an authorized Can-Am dealer to
check the performance of the cooling
system.

Engine Coolant

Engine Coolant Level Verification

WARNING

Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.

1. Place vehicle on a level surface.

2. Remove seat.

3. Lift the front part of the central

panel.

vmo2008-005-002_a

TYPICAL

1. Lift here

4. Remove console.

4.1

Lift rear portion of console up-
wards until the studs are re-
leased from the grommets.

vmo2014-010-003_a

1. Console
2. Studs and grommets

4.2

Pull console rearwards.

5. With vehicle on a level surface, liq-

uid should be between MIN. and
MAX. level marks of coolant reser-
voir.

100

______________

Содержание can-am RENEGADE 1000 2015





























































































































































Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы:

BRP can-am RENEGADE 1000 2015, Руководство оператора, Страница: 102 / 156

Результаты поиска

Содержание can-am RENEGADE 1000 2015

Отзывы: