FINAL INSPECTION
tbl2013-009-048_b
HIGH SPEED COMPRESSION DAMPING (USE A 17 MM
WRENCH)
1. High speed adjuster
2.
Increases
damping (stiffer)
3.
Decreases
damping (softer)
Rebound Damping
X rs DPS Models
Use a flat screwdriver to adjust it.
tbl2013-009-049_a
1. Rebound adjuster
2.
Increases
rebound (stiffer)
3.
Decreases
rebound (softer)
ASSEMBLY INSPECTION
Inspect the following parts to make sure that the
vehicle is properly assembled.
1. Chassis
2. Steering operation
3. Suspension arm ball joint cotter pins
4. Tie rod end nuts and cotter pins
FINAL INSPECTION
Vehicle Test Run
Ride the vehicle to ensure proper operation of all
systems and components.
Vehicle Cleaning
1. Wash and dry the vehicle.
NOTICE
Never use a high pressure washer to
clean the vehicle. USE LOW PRESSURE ONLY
(like a garden hose). The high pressure can
cause electrical or mechanical damages.
2. Remove any dirt.
3. Clean vinyl and plastic parts, using a chamois,
a flannel cloth or a microfiber cloth with
XPS
MULTI-PURPOSE CLEANER (P/N 219 701 709)
.
NOTICE
It is necessary to use a chamois, a
flannel cloth or a microfiber cloth on plastic
parts to avoid damaging surfaces. Never clean
plastic parts with strong detergent, degreasing
agent, paint thinner, acetone, products con-
taining chlorine, etc.
4. Clean the entire vehicle, including metallic
parts, with
XPS ATV WASH (P/N 219 701 702)
.
5. Painted parts which are damaged should be
properly repainted to prevent rust.
Delivery To Customer
Before Delivery the Vehicle
Complete the
PREDELIVERY CHECK LIST
.
The customer must read and sign the
PREDELIV-
ERY CHECK LIST
.
Give
OPERATOR’S GUIDE
and
SAFETY DVD
to
customer.
Any person who rides this vehicle should read and
understand all the information given on hang tag
and safety labels before riding.
PREDELIVERY
2014-1
29 / 34
