ADJUSTMENTS
REAR SUSPENSION FACTORY SETTINGS
ADJUSTMENT
MODEL
FACTORY SETTING
Base
54.5 mm (2.15 in)
Spring preload
X rs DPS
71.4 mm (2.81 in)
Compression damping
Base
12 positions
Compression damping
(low speed)
X rs DPS
12 positions
Compression damping
(high speed)
X rs DPS
9 positions
Rebound damping
X rs DPS
9 positions
Spring Preload Adjustment
(Front and Rear)
Shorten the spring for a firmer ride and rough rid-
ing condition or when pulling a trailer.
Lengthen the spring for a softer ride and smooth
riding condition.
WARNING
The left and right shock adjustment on front
or rear suspension must always be set to the
same position. Never adjust one shock only.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
Lift the vehicle. Spring length should be mea-
sured without load on the wheels.
Adjust by loosening lock ring and turning adjuster
ring as desired. Use tool from vehicle tool kit.
tbl2013-009-046_a
TYPICAL
1. Loosen top lock ring
2. Turn adjuster ring as necessary
3. To soften preload
4. To stiffen preload
Shock Damping Adjustments
(Front and Rear)
Perform adjustments
one
position (click) at a time.
Test run the vehicle under the same conditions.
Proceed methodically until you are satisfied.
Compression Damping
Base Models
Compression damping controls how the shock ab-
sorber reacts when suspension collapses.
PREDELIVERY
2014-1
27 / 34
