ADJUSTMENTS
When a higher caster angle is set, the knuckles
tend more to bring the front wheels to a straight
line than with a lower angle. Also, when a higher
caster angle is set, a greater force is required to
steer the vehicle than with a lower angle.
1. Adjust the caster as per the owner’s prefer-
ence.
2. If an adjustment is required, refer to the appro-
priate
OPERATOR'S GUIDE
for proper proce-
dure.
Camber
X mx Models
The camber angle is the angle between the
vertical and the steering knuckle pivot axis in a
transversal axis.
Adjusting the camber angle changes the front
wheels inclination and has an effect on the steer-
ing stability an feedback.
1. Adjust the camber as per the owner’s prefer-
ence.
2. If an adjustment is required, refer to the appro-
priate
OPERATOR'S GUIDE
for proper proce-
dure.
B.U.D.S. Programming
Vehicle does not have DESS, therefore B.U.D.S.is
not required to program a key.
Even if vehicle does not have a multifunction
gauge, it is recommended to use B.U.D.S. to enter
all start-up information in the ECM and to ensure
no fault codes are active and to clear any occurred
faults.
Connecting a PC to Vehicle
1. Connect the PC to vehicle. Refer to the latest
edition of
CAN-AM ATV B.U.D.S. SOFTWARE
AND COMMUNICATION TOOLS
for the prop-
er connecting procedure.
2. Ensure that the status bar shows the proper
protocol and number.
3. Press the READ DATA button from the tool bar
to initiate communication with the vehicle.
Entering Customer's Name
NOTE:
When starting the vehicle, the multifunc-
tion display will show the name of the customer;
for example: “HI JOHN SMITH”. If the cus-
tomer's name is not programmed, only “HI” will
be visible when turning the vehicle ON.
1. Click on the VEHICLE tab to open the vehicle
information page.
vbl2006-007-001
VEHICLE TAB
2. Type the name of the customer.
vbl2006-007-002
3. Click on WRITE DATA to save the information
in the vehicle's ECM.
NOTE:
After you are finished typing the name,
B.U.D.S. automatically updates the Delivery Date
on the screen.
Resetting Trip Hours and Trip Distance
1. Ensure that the VEHICLE tab is selected.
2. Click on the RESET TRIP buttons to reset the
information.
PREDELIVERY
2009-5
11 / 19
