Operating Instructions
Page 21
LO
HI
OFF
GRILL
Grill Lighting Instructions
Checking orifices alignment with burners
Orifices may shift during assembly and movement; therefore, check the orifices alignment with the
burners according to the following illustrations before lighting.
Orifice stud inside the air shutter
Orifice stud inside the air shutter
Fig. 33 Main Burner and Orifice Relationship
Orifice Position
Orifice must be in the
center of air shutter
Fig. 34 Side Burner and Orifice Relationship
To Light the Main Burners & the Side Burner
1.
Make sure the control knobs are in the “OFF” position.
2.
Open the grill hood.
3.
Make sure the drip tray is installed.
4.
Open the tank valve.
5.
Light each burner separately.
Turning on two burner valves
together could trip the flow limiting device in the tank connection.
6.
Push in and turn each control knob to the left and continue turning
from off to “HI” for 5 seconds while knob is depressed inward.
7.
If the burner does not ignite within 5 seconds, immediately turn the control knob back to the
"OFF" position. Wait 5 minutes and repeat STEPS 6 and 7 up to 2 or 3 times.
8.
If the burner still cannot be lit, refer to the Troubleshooting Guide.
Содержание BR4GRILL
Страница 103: ......
Страница 104: ...Distributed By Camp Chef P O Box 4057 Logan UT 84323 Printed in China ...