Assembly Instructions
Page 10
Step 8: Attach Drip Tray
Required: Drip Tray (W)
Slide the drip tray between the drip tray supports. (See Fig. 10).
Step 9: Mount the Burner Box onto the Cabinet
Required: (4) 1/4-20 x 3/8” Screws (G), (1) Burner Box (J), (1) Wind Shield (I)
Warning: The burner box is HEAVY. Before assembling the burner box to the grill cabinet,
make sure the cabinet is located in a solid and level place, and the wheels are locked. Two people
are required for a safe assembly.
a.
Lock the two casters.
b.
Take the pressure regulator (applicable only for LP gas grill) and side burner hose out from
under the control box (J). Then lift the burner box onto the cabinet, making sure that the flexible
gas lines are in the cabinet then position it on the cabinet by aligning the four tabs on top of the
cabinet with the holes in the burner box. (See Fig. 11)
Fig. 10 Fig. 11
Warning: Do not lift burner box from sides. We recommend holding the control box and the
rear panel of the burner box to avoid pinching fingers under the burner box.
c.
Insert the 1/4-20 x 3/8” screws (G) into the two pre-drilled holes on each side of the burner box,
do not fully tighten screws until all screws have been installed. For LP gas grill, go to step d.
Drip Tray Support
Drip Tray
Burner Box
Side Burner Hose
LP Gas Pressure
Regulator
Содержание BR4GRILL
Страница 103: ......
Страница 104: ...Distributed By Camp Chef P O Box 4057 Logan UT 84323 Printed in China ...