• TOP 12” DISK
• TURNED LEG WITH DOWEL CENTER
• BOTTOM 12” DISK
• 24” DISK
INCLUDED IN PACKAGE:
WOOD PIECES: (1 EACH)
• ¼” X 1” WOODEN DOWELS ( X 4 )
UNTIL DISK STOPS AT TOP OF LEG.
DOWELS AND PUSH TOGETHER UNTIL DISK STOPS AT
BOTTOM OF LEG
"PROVIDED FOR USE IN TABLE TOP PROVIDED
2-C) INSERT SCREW THROUGH CENTER HOLE OF DISK
AND INTO THE THREADED INSERT IN THE LEG AND TIGHTEN.
1-B) ALIGN AND PUSH 12" DISK ONTO DOWELS
STEP 2 - BOTTOM ASSEMBLY
STEP 1 - TOP ASSEMBLY
BY CUSTOMER"
THE PRE DRILLED HOLES IN THE BOTTOM OF LEG
1-A) INSERT ¼” X 1” WOODEN DOWELS ( X 2 ) INTO
THE PRE DRILLED HOLES IN THE TOP OF LEG
THE THREADED INSERT IN THE LEG AND TIGHTEN.
1-C) INSERT SCREW THROUGH DISK AND INTO
HARDWARE:
• 1 ½” FLAT HEAD SCREW ½-13 THREAD ( X 2 )
• 1 ½” FLAD HEAD SCREW 3/8-16 THREAD ( X 8 )
• 3/8-16 THREADED INSERTS ( X 4 )
2-B) ALIGN AND PUSH 12" BOTTOM DISK ONTO THE TWO
2-A) INSERT ¼” X 1” WOODEN DOWELS ( X 2 ) INTO
DATE:
SHOIN TABLE KIT ASSEMBLY INSTRUCTIONS PAGE 1
11/20/2018
TOP 12" DISK
1-B
1-A
IN THE CENTER
ONE GOING DOWN
ON THE BOTTOM
TOP PLATE HAS
FOUR COUNTER
SUNK HOLES
GOING UP AND
RADIUS EDGE
1-C
1-C
1-B
1-A
2-A
BOTTOM
INSERTS
2-C
DISK WITH
THREADED
2-A
ROUNDED
BOTTOM
TOP
EDGE
EDGES
ROUNDED