![Brother Work Smart MFC-J650dw Скачать руководство пользователя страница 119](http://html.mh-extra.com/html/brother/work-smart-mfc-j650dw/work-smart-mfc-j650dw_basic-users-manual_54466119.webp)
Troubleshooting
109
B
Unable to Clean XX
Unable to Initialize XX
Unable to Print XX
Unable to Scan XX
The machine has a mechanical
problem.
—
OR
—
A foreign object, such as a paper clip
or a piece of ripped paper, is in the
machine.
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, do the following.
Transferring your faxes or Fax
disconnecting the machine so you will
not lose any important messages.
Then disconnect the machine from
the power for several minutes and
reconnect it.
(MFC-J870DW)
Disconnect the machine from the
power for several minutes and
reconnect it. (The machine can be
turned off for approximately 24 hours
without losing faxes stored in the
memory. See
Unusable Device
Disconnect device from
front connector & turn
machine off & then on
A broken device has been connected
to the USB direct interface.
Unplug the device from the USB
direct interface, then press
to
turn the machine off and then on
again.
Unusable Device
Please disconnect
USB device.
A USB device or USB Flash drive that
is not supported has been connected
to the USB direct interface.
For more information, visit us at
http://solutions.brother.com/.
Unplug the device from the USB
direct interface. Turn the machine off
and then on again.
Wrong Ink Colour
An ink cartridge has been installed in
the wrong position.
Check which ink cartridges are not
matched by colour to their ink
cartridge positions and move them to
their correct positions.
Error Message
Cause
Action
Содержание Work Smart MFC-J650dw
Страница 1: ...Basic User s Guide MFC J650DW MFC J870DW Version 0 ARL ASA NZ ...
Страница 10: ...viii ...