Brother TD-4000, Руководство по обслуживанию

Страница: 117 / 139

1 - 4
1.3 Setting and Use Procedure of the Serviceman Software Tool
This tool is prepared the TD-4000 and TD-4100N. The explanation explains the TD-
4100N as an example. The difference of the TD-4000 and TD-4100N is only the
existence of the inspection of the "Read MAC Address". There are the inspection
buttons of the "MAC Address check" and "Register to the database", but does not use
them in the serviceman software tool.
1.3.1 Role of the Serviceman Software Tool
This tool serves to check the operation of the machine, and perform the reference and
the update of the EEPROM after repair work is done.
1.3.2 Setting Procedure of the Serviceman Software Tool
Check the setting before making an examination with a serviceman software tool, and
change it. The setting of the printing file pass of the "adjustment print test" can be
changed, and the COM port setting used in the "RS test" can be changed.
(1) Connect the machine to your PC with the USB cable and turn the POWER button
ON.
(2) When there is not a driver in your PC, "Found New Hardware Wizard" screen is
displayed. In this case, click the "Cancel" button. ( Refer to Figure 1. )
(3) Start the serviceman software tool (TD4000tstSE.exe).
(The file names of the tool of the TD-4000 and TD-4100N are the same name.)
Figure 6. Serviceman software tool main screen
This screen is TD-4100N.
In the case of TD-4000, the
operation is same.