Brother ScanNCut DX Stamp Starter Kit Скачать руководство пользователя страница 1

1

You can cut the stamp sheet with your cutting machine to create original stamps.

Do not fold or bend the stamp sheet.

For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

Do not store stamp sheets or acrylic blocks in an environment exposed to direct sunlight or extremely low or extremely high 
temperatures.

The contents of this document are subject to change without notice.

The screens in this manual are for illustration purposes only and may differ from the actual screens.

After purchasing this kit, check the contents.

*1 This accessory is consumable. After you have used it all, purchase CASTPS1(stamp sheets). To purchase options, contact the retailer 

where this kit was purchased.

Stamp Starter Kit

About Stamp Starter Kit

Precautions

Accessories

EN

A

B

C

D

Name

A

Stamp sheet

*1

 5.9" × 7.8" (150 mm × 200 mm) : 3 pieces

B

Acrylic block 2.9" × 3.9" (75 mm × 100 mm)

C

Activation card for access to 50 stamp patterns

D

Insertion

Version 0

Содержание ScanNCut DX Stamp Starter Kit

Страница 1: ...ment are subject to change without notice The screens in this manual are for illustration purposes only and may differ from the actual screens After purchasing this kit check the contents 1 This accessory is consumable After you have used it all purchase CASTPS1 stamp sheets To purchase options contact the retailer where this kit was purchased Stamp Starter Kit About Stamp Starter Kit Precautions ...

Страница 2: ...ff the silver part of the card and reveal the activation code The uppercase letters I and O are not used in the activation code The activation code is valid for only one login ID for CanvasWorkspace The same activation code cannot be used again e Check the content on the activation confirmation screen and if there are no problems click Activate Click OK and the activation is complete A pattern cat...

Страница 3: ...etween the stamp sheet and the backing do not affect cutting b Download the stamp pattern from CanvasWorkspace c Retrieve the pattern on the cutting machine d Touch the Test key to perform test cut Note Cut patterns to a size that fits within the acrylic block 3 x 4 75 mm x 100 mm Cut patterns at least 5 mm from the edge of the stamp sheet When arranging multiple patterns set the number of Pattern...

Страница 4: ...a guide Note When placing characters or non symmetrical patterns on the acrylic block be sure to flip them over before placing them on the block j Using the ink color the stamp pattern k Apply the stamp at the desired location Note After use wipe off the ink on the cut out stamp sheet and acrylic block with a damp cloth or tissue and then store them after they have dried When the leftover stamp sh...

Отзывы: