Installing the LPR driver and CUPS wrapper driver (Linux®)
To print on Linux®, you need to install the LPR driver and CUPS wrapper driver.
Do the following:
1. Log in as a superuser ( or use "sudo" option if it is required).
2. Make sure all necessary procedures have been completed:
3. Download the LPR driver and CUPS wrapper driver from the [
4. Install the LPR driver and CUPS wrapper driver.
a. Turn on your printer and connect the USB or the network cable.
Click the close button if the installation wizard appears.
b. Open the terminal and go to the directory where the drivers are located.
c. Install the LPR driver.
Command (for dpkg) :
dpkg -i --force-all(lpr-drivername)
Command (for rpm) :
rpm -ihv --nodeps (lpr-drivername)
d. Install the CUPS wrapper driver.
Command (for dpkg) :
dpkg -i --force-all (cupswrapper-drivername)
Command (for rpm) :
rpm -ihv --nodeps (cupswrapper-drivername)
5. Configure your printer on the CUPS web interface.
a. Open a web browser and go to "http://localhost:631/printers".
b. Click "Modify Printer" and set following parameters.
For USB connection
- Your printer's name
for Device
Select your device's URL.
- Brother
for Make / Manufacturer Selection
- Your printer's name
for Model / Driver Selection
Example of a USB printer entry (e.g. QL-1050)
For Network connection
- "LPD/LPR Host or Printer"
or "AppSocket/HP JetDirect"
for Device
- socket://(Your printer's IP address)
for Device URL
- Brother
for Make / Manufacturer Selection
- Your printer's name
for Model / Driver Selection
Example of a network printer entry (e,g, QL-580N)
RJ-3150
196 / 237
Содержание RJ-3150
Страница 112: ...RJ 3150 Go to Index Go to Index 106 237 ...