Brother PT 1400 - P-Touch 1400 Two-color Thermal Transfer Printer, Руководство пользователя, Страница: 27 / 125

19
B
a
si
c F
u
n
c
ti
o
n
s
Entering bar code data
1
Press
c
.
2
Type in the new bar code data or edit the old data.
3
Press
n
to add the bar code to the text.
The following special characters can only be added to bar codes created using protocol
CODE39 or CODABAR .
☞
To add special characters to the bar code data (only with protocols CODE39 ,
CODABAR , EAN128 or CODE128 ), position the cursor below the character
immediately to the right of where you wish to add the special character, and then
press
s
. Press
u
or
d
until the desired special character is displayed, and
then press
n
to add the character to the data. (Refer to the tables below for a list
of the special characters that are available.)
☞
To change the data or WIDTH or UNDER# parameter settings of a bar code that has
already been added to the text, position the cursor below the bar code mark ( ), and
then press
g
, then
c
.
CODE39 CODABAR
Symbol Character Symbol Character Symbol Character Symbol Character
0
–
4 / 0
–
3 /
1 . 5 + 1 $ 4 .
2 (SPACE) 6 % 2 : 5 +
3 $