Brother PJ-822, Руководство пользователя

Страница: 165 / 199

Pre-Feed
When you select Enable , the printer ejects a short length of paper when the printer turns on. When using
perforated roll paper or roll paper that is pre-printed, we recommend setting this parameter to Disable .
Skip Perforation
Leaves a one-inch (25.4 mm) margin at the top and bottom of the paper. Use it when printing on perforated
roll paper so that the printer does not print on the perforation.
Print Settings Tab
Command Mode
Specify the printer’s command format.
Print Density
Select the printing density.
Print Speed
Select the printer’s printing speed.
Option Description
1.1 ips / 27 mm/s Select these options when you want to prioritize image
quality.
1.9 ips / 48 mm/s
2.7 ips / 70 mm/s
3.5 ips / 90 mm/s This setting balances speed and image quality. Select
this option when printing standard documents.
Fast (Draft Quality) Speed priority mode. Select this option when printing
documents containing bold text.
Fast (Line Conversion) Speed priority mode. Select this option when printing
documents with ruled pages or bold text.
Extended Characters
Specify which characters are used when printing ASCII characters 128 to 255.
Character Set Map
Specify which character set is used, allowing you to print special characters appropriate for the language
selected.
Default Font
Specify which built-in font is used.
Character Attributes
Specify the attributes used for printed text.
Dash Line Print
Prints dash lines between pages, which is useful when printing on roll paper. Set Form Feed Mode to Fixed
Page , and then select Enable . Note that dash lines are printed on the paper; they are not punched into the
paper.
Stencil Paper Mode
This mode is suitable for printing on stencil paper. Turn this setting on when printing on stencil paper.
Printer Settings Tab
Auto Power On
Specify how the printer responds when connected to a USB, an AC or DC power outlet.
Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
161