Brother PE-Design 8, Инструкция по эксплуатации

Страница: 206 / 269

204
Basic Programmable Stitch Creator Operations
Step 3 Saving the created motif
stitch pattern
The created pattern can be saved. Motif stitch
patterns are saved in the .pmf format.
These patterns are saved in the same way that fill/
stamp stitch patterns are saved.
c
“Saving the edited fill/stamp stitch pattern”
on page 201.
Step 4 Using the edited motif stitch
pattern in Layout & Editing
Start up Layout & Editing.
Select an embroidery pattern.
From the Line sew type selector, select Motif
Stitch .
Click Sew , then Sewing Attribute Setting .
c
“Layout & Editing Window” on page 47.
Click beside Pattern .
Select the drive and folder where the pattern
was saved in Step 4.
Click the created motif stitch pattern, and then
click
OK .
→
The pattern is applied to the outlines of
the embroidery pattern.
If necessary, change any other sewing
attributes.
b
Memo:
• To move the point horizontally or vertically,
hold down the key while dragging it.
• Pressing the arrow keys moves the
selected point one grid mark in the direction
of the arrow on the key. If the grid is not
displayed, the pattern moves a distance
smaller than the smallest grid interval in the
direction of the arrow on the key.
• To delete a selected point, press the
key.
Shift
Delete
1
2
3
4
b
Memo:
A motif stitch pattern can be used when the
motif stitch, piping stitch or stippling stitch has
been selected as the sew type of a region.
5
6
7
8